韩荣部品:中国联通c网用短信发wap push。
来源:百度文库 编辑:九乡新闻网 时间:2024/05/03 09:13:44
SMS notification for MMS/Java Game downloads etc SearchSMS & MMS Technical Forum ? WAP Technical Discussions (unsupported) ? Archive through March 07, 2006 ? SMS notification for MMS/Java Game downloads etc? Previous || Next ?AuthorMessageShare Emailjohnson
Unregistered guest
Posted on Tuesday, December 30, 2003 - 08:14 am:
Hi Bryce
I'm interested in SMS etc. and I’ve read a lot of your articles and quite useful. Please answer me a question about sms notifications for mms/java application downloads.
1. Are there any different between the normal sms and sms notification? e.g. sms is from normal GSM gateway and service notification is over GPRS?
2. How does mobile know which sms is normal text message and some sms messages are notification?
3. For the sms notification, does mobile and gets URL, login id & pwd from the sms content to retrieval the specified content?
Rgds & thnx
thanks
Kent Williams
New member
Username: Kent
Post Number: 28
Registered: 10-2003
Posted on Thursday, January 15, 2004 - 06:42 pm:
Hi Johnson,
quote:1. Are there any different between the normal sms and sms notification? e.g. sms is from normal GSM gateway and service notification is over GPRS?
Both occur over GSM/SMS.
A WAP Push message (service indication) is transmitted as a binary SMS message. When you select to load the link that is referenced in the push, that is when GPRS (or a dial-up WAP connection) would be activated.
quote:2. How does mobile know which sms is normal text message and some sms messages are notification?
For starters, the message is in binary format instead of text format.
Within the binary SMS message format, there are different attributes that can indicate that a message is of a particular content type.
For many types of binary SMS content, a user data header (UDH)is included in the SMS message, and the UDH is used to identify the type of message content.
WAP Push messages over SMS are formatted similar to Nokia Smart Messaging format messages. The UDH specifies a destination port number for the message to be routed to a particular application in the phone. In this case, there is a port number for WAP push, and the phone identifies the message as a WAP push message, and it then decodes the message as such.
quote:3. For the sms notification, does mobile and gets URL, login id & pwd from the sms content to retrieval the specified content?
A WAP push service indication message includes a text component and a URL. There is no login id and password.
See the following thread for some comments from Bryce on this topic:
http://www.nowsms.com/discus/messages/132/2197.html
(Bryce has been a bit overwhelmed by the amount of traffic on this forum, so he and I are going to concentrate on moderating different forums within the board.)
--
Kent Williams
Now Wireless Support
http://www.nowwireless.comjohnson
Unregistered guest
Posted on Friday, January 16, 2004 - 09:45 am:
Big thanks Kent Williams!
From your forum, I successfully obtain enough information on wap push concept and hex encoded method for SI etc, and now I can send sms push messages to nokia mobile, the mobile also can download color picture, melody thru wml etc..
However, get small problem for java game download:
.jad file displays properly, accept to retrieve .jar file from server, it takes quite a long time and mobile says: invalid file and stop GPRS. Really don’t know what happening? Due to telco blocks .jar files or downloading url port settings problem?
BTW: what are mobile brands to support smart message?
It highly appreciate your forum to cover most of mobile information
thanks and regards
K.Tanaka
Unregistered guest
Posted on Wednesday, January 21, 2004 - 08:21 am:
I would like to know basic system configuration regarding sending MMS notification. As I understand SMS is used for UE to indicate that a MMS is awaiting retrieval in the MMSC, system configuration is following.
MMSC-> PPG-> MMSC-> UE
Is this correct?
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce
Post Number: 1751
Registered: 10-2002
Posted on Wednesday, January 28, 2004 - 08:09 pm:
Johnson,
Do you ever see a request come in to your web server to retrieve the JAR?
Some Siemens phones expect to use HTTP to download a JAR. This can cause a problem because the phone needs to be configured to connect to a GPRS APN that supports full internet access in order to be able to retrieve the JAR.
Some Motorola phones issue some strange requests that not all WAP gateways understand. (And in these cases I have seen this type of error.)
It is also possible that the operator gateway does not support segmentation-and-reassembly (SAR) in their WAP gateway, and therefore has some size limitations. It may be worth experimenting with some different sizes to determine if that is the problem. Unfortunately, if that is the problem, the only way around it is to use an alternate gateway.
quote:BTW: what are mobile brands to support smart message?
Smart message is a Nokia specification, so that is primarily supported by Nokia phones.
WAP Push uses a format similar to Nokia Smart Messaging, but it is widely supported by most WAP phones released over the past couple of years.
-bnBryce Norwood - NowSMS Support
Board Administrator
Username: Bryce
Post Number: 1752
Registered: 10-2002
Posted on Wednesday, January 28, 2004 - 08:11 pm:
quote:I would like to know basic system configuration regarding sending MMS notification. As I understand SMS is used for UE to indicate that a MMS is awaiting retrieval in the MMSC, system configuration is following.
MMSC-> PPG-> MMSC-> UE
Is this correct?
Yes. Although the MMSC may generate the push directly without going through an actual Push Proxy Gateway.
For example, that is what our Now SMS/MMS Gateway does. (Although it does also have an option for routing the push notifications through a push proxy gateway ... but we primarily use that only for sending the push in non-GSM environments, such as CDMA.)
-bnAnonymous
Posted on Sunday, March 28, 2004 - 10:28 am:
can i send game through sms like ringtone? please send me the answer.Hazel
Unregistered guest
Posted on Wednesday, March 31, 2004 - 02:46 am:
Bryce,
I read about your company's SMS/MMS gateway reply on 28 Jan 2004.
I am a applications developer in China.
Currently, I am trying to develop WAP applications that can display properly over my CDMA phone over China Unicom's CDMA network.
However, when I want to get a URL that I can simply click on to access a WAP site on my CDMA phone over a CDMA netwk, the URL is a text message.On a GPRS network however, when I test by subscribing to the same service, I obtain a binary WAP push message ie I can simply click on the link and access the WAP site.
I'll like to seek your opinion on where the problem lies:
- issit the PPG? Can the PPG only be controlled by the country's telecom operators?
- issit the phone ie it cannot interpret the binaries properly?
Thanks alot!freewill
Unregistered guest
Posted on Wednesday, March 31, 2004 - 10:06 am:
hi Hazel,
If u wanna develop push applications for China Unicom(CU),u'd better use their PPG service to send the push msgs.
Since the CU selected Openwave's Wap gateway(plus PPG) to provide wap services nationwide for WAP1.x terminals, the NON-STANDARD push protocols developed by Openwave proprietarily became the de-facto standards.
So there is no hope for u ,an application developer, to generate the push sms and send it directly to the terminal.EVEN u know the detailed format of Openwave's proprietary protocols wont help.
So for ur questions,
1) You should contact CU for the access rights to their PPG server;
2) Most of the CDMA terminals used in China can only accept push format from Openwave.hazel
Unregistered guest
Posted on Thursday, April 01, 2004 - 03:24 am:
Hello freewill,
Thanks for your reply.
Do you mean that even if we have the binary format of the service indication message (the term used by nokia phones for the binary used over GSM/GPRS netwk), it is not possible for us to send a message to the user in a way that is convenient to him? ie he just needs to click on the link?
thksfreewill
Unregistered guest
Posted on Thursday, April 01, 2004 - 06:20 am:
hi hazel,
I think for GSM network, the standard push format works. U can try it.freewill
Unregistered guest
Posted on Thursday, April 01, 2004 - 06:34 am:
hi hazel,
I think for GSM network, the standard push format works. U can try it.hazel
Unregistered guest
Posted on Thursday, April 01, 2004 - 08:53 am:
hi,
what about the CDMA network? Why can't the WAP push format work?freewill
Unregistered guest
Posted on Thursday, April 01, 2004 - 09:00 am:
hi hazel,
As I said before, Unicom uses openwave's push msg for it's cdma network. there's some tricky parts in their format.hazel
Unregistered guest
Posted on Friday, April 02, 2004 - 01:44 am:
Hello freewill,
thanks for your very prompt responses
from what i have gathered from your replies so far, does it mean that, in order to develop WAP applications that can work over Unicom's CDMA network, I will need to use Openwave's API?
thanks.ChenJinxiang
New member
Username: Jx_ch
Post Number: 2
Registered: 04-2004
Posted on Friday, April 02, 2004 - 04:04 am:
freewill,
do u mean that all China Unicom's PPG can only recognize openwave's non-standard WAP Push? but I've heard that Openwave's PPG can also accept standard SI wap push now.
The problem I've met is how to send out that binary message. To avoid bothering the link ID that CU requires to send a message on the internet,I have to turn to a CDMA Modem.However,CDMA modem doesn't support PDU mode.Then How can I send the binary message in a text mode?
thanks for any advice.
Jinxiang,Chenhazel
Unregistered guest
Posted on Friday, April 02, 2004 - 07:01 am:
hi,
what WAP standard is used to convert url into binary for sending?freewill
Unregistered guest
Posted on Friday, April 02, 2004 - 03:22 pm:
These days we're busy testing our wap 2.0 gateway(ppg) with CU, fortunately my tasks were rather successful, so I'll leave BJ for SH tomorrow. Maybe I'll visit this site less and less, pls dont hesitate to write me an email to ask me questions on WAP related issues.
to hazel,
1)Yes , I think to use openwave's push library is a wise and time-saving choice for u.
2)The related standards may include but is not limitted to WAPWSP/WAPWDP/WAPServiceIndication/SMPP/IS 637 SMS
to chenjinxiang,
1)As far as I know, except for the online-push which is only supportted by Toshiba 618 phone, the current runing PPGs in China Unicom cant support standard SI.
2)I'm not familiar with CDMA modem, usually PPG send such kind of msgs via SMSC or SMG.freewill
Unregistered guest
Posted on Friday, April 02, 2004 - 04:03 pm:
hi hazel,
I've got ur mail,but cant find the attachment u mentioned.
An even worse thing is my hotmail failed in sending my reply.hazel
Unregistered guest
Posted on Monday, April 05, 2004 - 12:22 am:
Hi freewill,
Does the current PPG used in China support SAR (segmentation and reassembly)?
What would be the technical differences (in terms of implementation for the developer) between WAP 1.2 and WAP 2.0?
Thanks!freewill
Unregistered guest
Posted on Monday, April 05, 2004 - 03:37 am:
to support SAR, both WAP gateway and Terminals should implement SAR protocol.
For WAP gateway ,SAR support is a must;As I'm not that familiar with terminals I'm not sure whether it is an optional for cell phones. The fact is that most cdma wap1.x enabled phones can support SAR though the max. size of file can be downloaded varies.
For Wap application developer,it's much more easier to program under wap 2.0,since wap 2.0 supports XHTML and TCP ...ting
Unregistered guest
Posted on Friday, April 09, 2004 - 09:57 am:
hi,
has anybody used an SMSC to send a service indication message via WAP in china?
thksRyanHarrison
Unregistered guest
Posted on Sunday, June 27, 2004 - 09:27 am:
Hi. Help needed. I download java games to my Nokia 3200. Then once sent, I open it only to receive a message, file format not supported. The original file was under the .jar format and it did not work. Then somone told me I needed a Jadmaker program to change the file to .jad. I did so and now the files are .jad. Instead of being 60-100kb, etc., when I send them over to my phone via Infared, they are now very low in size (0.4-6kb). The file format is still though not recognized. What's the problem and what do I need to play java games? Thanks.mohamed
Unregistered guest
Posted on Tuesday, June 29, 2004 - 04:45 pm:
i want a program in assemply code that converts text format into pdu formatSruthi
Unregistered guest
Posted on Friday, September 10, 2004 - 11:39 am:
I would like to know the diference between WAP1X & WAP2X?Ricky Guzman
Unregistered guest
Posted on Monday, September 20, 2004 - 09:46 am:
Hi everyone. I would just like to know if we are
able to retrieve our previous SMS (text) messages, say couple of days back. My phone, whice obviously doesnt hold that much Kbits of
data keeps on asking me to delete messages before
I could receive more.jasmin pop
Unregistered guest
Posted on Sunday, November 21, 2004 - 02:00 pm:
I need some documentation or any kind of help on how MMS compression is made..can anybody help me?!Manoj Kumar
Unregistered guest
Posted on Wednesday, November 24, 2004 - 11:01 am:
Hi,
I wanted to know the difference between the Notification indications of GSM and CDMA phones. I wanted to know, how the PDU looks like. what is the difference in WSP headers of CDMA and GSM phones?
Please give me some information regd. this.jay Jones
New member
Username: Nraged
Post Number: 3
Registered: 01-2005
Posted on Sunday, February 27, 2005 - 09:22 pm:
Take a look at http://www.thegamesarcade.com for the latest games for over 130 different phones in 35 countries from just US$3 in North America or Euro 3 in Europe or £1.50 in UK. They also hava a great forum for over 800 gamesAnonymous
Posted on Monday, December 12, 2005 - 02:21 pm:
From where can i decode the information regarding the MMS notification indication that i recieve on my mobile handset.
I mean, how can i get to know the encoding technique used ( ex: UCS2, UTF18, etc) for encoding the MMS notification, which is sent by the MMSC?Shilpa
Unregistered guest
Posted on Monday, December 12, 2005 - 02:23 pm:
From where can i decode the information regarding the MMS notification indication that i recieve on my mobile handset.
I mean, how can i get to know the encoding technique used ( ex: UCS2, UTF18, etc) for encoding the MMS notification, which is sent by the MMSC?Anonymous
Posted on Monday, March 06, 2006 - 07:23 pm:
deleted by admin 972
中国联通c网用短信发wap push。
wap push协议简介
wap push二进制短信配置浏览器的说明并有短信测试地址.
中移动将关闭短信方式的Wap Push业务(转)
促销活动_江西_中国联通3G.C
中国联通考虑年内发短期融资券或债券
WAP无线互联前途与命运 - M M C l i c k . c o m - 魅媒点击
发短信变脑残
老外发短信时常用的英文缩写 海纳百川推荐
用IPAD打电话,发短信的N种办法
中国移动,中国联通,中国网通短信退定方法!(转好文章)
一条短信错发成群发后
Push technology
一条短信发成这样
中国人为何酷爱发短信?
中国人为何酷爱发短信?
情人节该发的短信
中国人为何酷爱发短信?
敢不敢发,最欠扁骚扰短信
给各自老婆发短信“
中国人为何酷爱发短信?
腾讯与中国联通合作推微信资费套餐服务 上方网
教你如何整死那些发骗钱短信的人 - 萝卜网 - 人人都是艺术家
爆笑:一条暧昧短信发错之后