雪狼谷剧情分集剧情:Clothing care - Running shoes

来源:百度文库 编辑:九乡新闻网 时间:2024/04/28 11:44:19
================================================
[Clean]
 
[Leather surface]
Leather cleaning surface is relatively simple, as long as the leather with a damp cloth immediately with a clean dry cloth to wipe. Avoid long-term maintenance of the oil used to polish shoes to clean uppers, this will lead to upper cortex of small cracks.
 
[Frosted leather (suede side)]
This shoe cleaning materials are relatively simple, only need a small toothbrush clean and dry the skin surface can brush in one direction, in order to ensure the life of shoes, please try to avoid the usual wear and oil with water things that touch of quality shoe.
 
[Patent leather upper]
This leather is easy to clean, non-absorbent shoe with this special, we can find a more moist cloth after wiping with a dry cloth to dry the moisture.
 
[Special fabric leather]
This material cleaning method is with a small brush dipped in water plus a detergent cleaning upper dirty place, and then dip a small brush clean water, finish with a dry cloth to wipe. Draw attention to this: Do not use water directly to the brush and brush shoe, shoe care to avoid use of shoe polish, shoes, these will reduce the life of its own.
================================================
[Maintenance]
 
       Should first ensure that the dry inside the shoes, you can find some paper stuffed into shoes as a filler inside the body of the shoe leather to stretch stays smooth, but do not plug too much paper, then find a packet of preservative on shoes mouth, with special shoes after the film wrapped the body of the shoe with a hair dryer in the 5-10 cm away from the body of the shoe to shoe and shoe body blow to the membrane close to the best smooth. Shoes remind you sure you want to film and shoes are all the air inside the air-blown to ensure the tightness of shoes. Finally, shoes on the ventilated, dry place, careful to avoid glare.
 
First, when the shoes dirty, scrub gently with water dipped in detergent, then rinse, dry place out cool air, avoid direct sunlight and exposure. Never use open flame heating or drying, to avoid aging, a plastic, fading and serious distortion. The excessive direct sunlight, and a hair dryer heat and other methods are improper care will reduce the life of shoes; wash not be a long soak, soaking time generally should not exceed 20 minutes. Real leather is not water immersion;
 
Second, if long storage, should be the first shoe brush clean, cool dry ventilated storage place, so that the shoes have sufficient time to dry to avoid mildew. Best leather shoes or shoes with a ball of paper propped up care, to avoid serious distortion. Soles of the shoes head down towards the wall, ventilated place to dry at room temperature, immersed in water so that the end to prevent foam; (because foaming material is not easy to do, is not recommended to wet shoes flat.)
 
Third, in the process of wearing or scrub brush or not to use too much force perfect, but can not pull the nails or sharp edges of these parts of the printing pattern. In the wear over time, some patterns on the surface may be some small cracks (in particular, often tortuous parts), which are a normal phenomenon;
 
Four day training athletes or sports enthusiasts often best to prepare than two pairs of shoes to replace; running shoes on the nylon mesh fabric and man-made tanning are relatively easy to maintain, hand wash with water, it is best not to use the washing machine to wash or water immersion; the shoes and laces separately with mild soap / detergent washing. When washing out shoe insole, gently scrub with a soft brush, and finally rinse;
 
Five, to enable you to achieve a satisfactory wear results, fair treatment of your shoes you wear. Remember not to wear normal running shoes or walking shoes for soccer, basketball and other vigorous exercise. At the same time, but any kind of sports shoes with the tool can not touch;
================================================
[Other]
 
A: shoe leather, with cotton wet, wring, wipe!
 
II: mesh, mesh networks mostly PV surface, you can use an old toothbrush, stained water, wipe from the inside out! Such as mesh in front of the shoe, then it should be the shoes for toe shoes direction of the brush! so not too many dirty things left in shoes!
 
Smear all over, remember not to direct sun exposure, as will yellow the white shoes!
 
Correct method is: good shoes on, wipe inside your home cool and ventilated place, where there is little if ventilation of the sun, you can rely on tissues, after all the wet, flat on the upper (ie cover all the shoes), so that does not occur the phenomenon of white shoes, yellow!
================================================
【Article is excerpted from: Baidu Encyclopedia】
【Network reprint / Just reference】
【Translation is by Goolge】