金泰熙在韩国人气怎样:macd指标选用

macd指标选用

2011-01-15 13:31:23|  分类： 技术指标 |  标签： |字号大中小 订阅

多头二次翻红公式再加个涨幅大于3%把这两个条件改成选股公式 

DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
FH1:=REF(MACD,1)FH2:=MACD>=0 AND COUNT(MACD>REF(MACD,1),1)=1;
FH3:=EMA(C,30)>=REF(EMA(C,30),1) AND COUNT(EMA(C,5)>EMA(C,10) AND EMA(C,10)>EMA(C,30),1)=1;
FH4:=CROSS(C,EMA(C,30)) OR C>EMA(C,30);
FH5:=FH1 AND FH2 AND FH3 AND FH4;
FH6:=FH1 AND FH2 AND FH3 AND FH4 AND ABS((DIFF-DEA)/C)<0.018;
FH7:=FH1 AND FH2 AND FH3 AND FH4 AND MACD<0.10;
FH5 OR FH6 OR FH7 AND C/REF(C,1)>1.03;

 MACD出现第一条红柱的选股公式

DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIF,9);
MACD:=(DIF-DEA)*2;
CROSS(DIF,DEA) AND DEA>0 AND BARSLAST(CROSS(DEA,DIF))<4
AND REF(COUNT(DIF>DEA,7)=7,BARSLAST(CROSS(DEA,DIF))+1);

MACD绿柱开始缩短的第一个绿柱的选股公式

diff:=EMA(C,12)-EMA(C,26);
dea:=EMA(diff,9);
MACD:=diff-dea;
xg:CROSS(MACD,REF(MACD,1)) AND REF(MACD,1)<0;

MACD骑墙技巧：
股价刚上涨时如DIF线已跨上0轴，而MACD线（或称DEA线）即将跨上但还未跨上0轴时，一旦成交放量，则上涨有望加速。
DIF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIF,9);
MACD:=2*(DIF-DEA);
DIF>=0 AND cross(dif,dea) AND V/MA(V,5)>1.5;

MACD综合公式①

包含MACD判定支压、零轴上方第一次金叉、数绿柱（显示零轴下方不断增长的绿柱数）及第四绿柱提示买入、DIF长期0轴上方游走下破零轴等子公式，适用于所有周期下使用。公式如下：

DIF:EMA(CLOSE,12)-EMA(CLOSE,26);

DEA:EMA(DIF,9);

MACD:(DIF-DEA)*2,COLORSTICK;

DRAWTEXT(REF(MACD,1)>0 AND MACD<0,MACD-0.01,'1');

DRAWTEXT(REF(MACD,2)>0 AND REF(MACD,1)<0 AND MACD<0,MACD-0.01,'2');

DRAWTEXT(REF(MACD,3)>0 AND REF(MACD,2)<0 AND REF(MACD,1)<0 AND MACD<0,MACD-0.01,'3');

DRAWTEXT(REF(MACD,4)>0 AND REF(MACD,3)<0 AND REF(MACD,2)<0 AND REF(MACD,1)<0 AND MACD<0,MACD-0.01,'4');

DRAWTEXT(REF(MACD,5)>0 AND REF(MACD,4)<0 AND REF(MACD,3)<0 AND REF(MACD,2)<0 AND REF(MACD,1)<0 AND MACD<0,MACD-0.01,'5');

DRAWTEXT(REF(MACD,6)>0 AND REF(MACD,5)<0 AND REF(MACD,4)<0 AND REF(MACD,3)<0 AND REF(MACD,2)<0 AND REF(MACD,1)<0 AND MACD<0,MACD-0.01,'6');

绿线天:=BARSLAST(CROSS(DEA,DIF));

红线天:=BARSLAST(CROSS(DIF,DEA));

压力:REF(H,绿线天),NODRAW;

支撑:REF(O,红线天),NODRAW;

A2:=IF(CROSS(0,DEA),1,0);

A12:=IF(DIF>0 AND CROSS(DIF,DEA),1,0);

SS2:=IF(A2,SUM(A12,0),0);

SSB2:=HHV(SS2,0);

SSS2:=SUM(A12,0);

O轴:0;

轴上第1次金叉:IF(SSS2-SSB2=1 AND SSS2>REF(SSS2,1),1,0),NODRAW;

DRAWICON(轴上第1次金叉,0.2,1);

破0轴: REF(DIF,1)>0 AND DIF<0,COLORGREEN,NODRAW;

DRAWICON(破0轴,0.1,2);

第四根绿柱:REF(MACD,1)=0,COLORRED,NODRAW;

DRAWICON(第四根绿柱,0,11);