雷明登剃须刀价格:The following files from Microsoft's WAIK
来源:百度文库 编辑:九乡新闻网 时间:2024/04/30 18:41:29
The following files from Microsoft's WAIK
ImageX.exe
wimfltr.sys
wimfltr.dll
wimgapi.dll
1. Copy all the files above into the same directory. (Extracting the zip files.)
2. Convert the autoIT code below to an ImageXGUI_v1-0.exe.(RTConsole.exe and DiskPartitioner.exe will be embedded in the covertedImageXGUI_v1-0.exe so you don't need those files after compiling).
3. I have this running on WinPE 2.0 and from XPSP2.
[ code='text' ] ( ExpandCollapse - Popup )
ImageX.exe
wimfltr.sys
wimfltr.dll
wimgapi.dll
1. Copy all the files above into the same directory. (Extracting the zip files.)
2. Convert the autoIT code below to an ImageXGUI_v1-0.exe.(RTConsole.exe and DiskPartitioner.exe will be embedded in the covertedImageXGUI_v1-0.exe so you don't need those files after compiling).
3. I have this running on WinPE 2.0 and from XPSP2.
[ code='text' ] ( ExpandCollapse - Popup )
#include
#include
#include
#include
#include
#include
#include
Dim $avDriveMapAdd[7]
$avDriveMapAdd[0] = "Unknown Error"
$avDriveMapAdd[1] = "Undefined / Other error"
$avDriveMapAdd[2] = "Access to the remote share was denied"
$avDriveMapAdd[3] = "The device is already assigned"
$avDriveMapAdd[4] = "Invalid device name"
$avDriveMapAdd[5] = "Invalid remote share"
$avDriveMapAdd[6] = "Invalid password"
Dim $avPing [5]
$avPing[0] = "Unknown Error"
$avPing[1] = "Host is offline"
$avPing[2] = "Host is unreachable"
$avPing[3] = "Bad destination"
$avPing[4] = "Other errors"
; Global Settings
;
Global $line1
Global $line3
Dim $gCaptureSource
Dim $gCaptureDestination
Dim $gCaptureCompression
Dim $gCaptureFlags
Dim $gCaptureConfig
Dim $gCaptureBoot
Dim $gCaptureCheck
Dim $gCaptureName
Dim $gCaptureDescription
Dim $gApplySource
Dim $gApplyDestination
Dim $gApplyVerify
Dim $gApplyName
Dim $imageinfo
Dim $gMapLetter
Dim $gMapUser
Dim $gMapPassword
Dim $gMapShare
Dim $sIni = @ScriptDir & "\gimagex.ini"
Dim $res
Dim $foo
Dim $gCaptureDiag
Dim $gApplyDiag
;
;Check for ImageX required files
;
If FileExists(@ScriptDir & "\imagex.exe") Then;File Found
ElseIf FileExists(@ScriptDir & "\wimfltr.dll") Then;File Found
ElseIf FileExists(@ScriptDir & "\wimfltr.sys") Then;File Found
ElseIf FileExists(@ScriptDir & "\wimgapi.dll") Then;File Found
Else
Msgbox(4096,"ImageXGUI", "You are missing one of the required files in the current folder: " & @ScriptDir & @CRLF & "ImageX will not function without these files!" & _
@CRLF & @CRLF & "imagex.exe" & @CRLF & "wimfltr.dll" & @CRLF & "wimfltr.sys" & @CRLF & "wimgapi.dll")
EndIf
;
; Create the main GUI
;
GUICreate("GImageX - ImageX GUI Wrapper", 640, 380, -1, -1 )
$hTab = GUICtrlCreateTab(10, 10, 620, 355)
$BaseX = 20
$BaseY = 35
; Drive Map Tab
$hTab_0 = GUICtrlCreateTabItem(" Drive Map ")
$CurX = $BaseX
$CurY = $BaseY
$CurY = $CurY + 10
GuiCtrlCreateGroup("Drive Mapping", $CurX+10, $CurY, 580, 135)
$CurY = $CurY + 18
GUICtrlCreateLabel("Letter", $CurX+20, $CurY+3)
$hMapLetter = GUICtrlCreateCombo("F:", $CurX+85, $CurY, 100, 500, $CBS_DROPDOWNLIST)
GUICtrlSetData(-1, "G:|H:|I:|J:|K:|L:|M:|N:|O:|P:|Q:|R:|S:|T:|U:|V:|W:|X:|Y:|Z:")
$CurY = $CurY + 27
GUICtrlCreateLabel("UNC Path", $CurX+20, $CurY+3)
$hMapShareEdit = GUICtrlCreateInput("\\Server\Sharename", $CurX+85, $CurY, 300)
$CurY = $CurY + 27
GUICtrlCreateLabel("Username", $CurX+20, $CurY+3)
$hMapUserEdit = GUICtrlCreateInput("Domain.com\%Username%", $CurX+85, $CurY, 300)
$CurY = $CurY + 27
GUICtrlCreateLabel("Password", $CurX+20, $CurY+3)
$hMapPasswordEdit = GUICtrlCreateInput("Password", $CurX+85, $CurY, 300, -1, $ES_PASSWORD)
$hMapButtonGo = GUICtrlCreateButton("&Map!", $BaseX+500, $BaseY+290, 100)
; Capture Tab
;
$hTab_1 = GUICtrlCreateTabItem(" Capture ")
$CurX = $BaseX
$CurY = $BaseY
; File Group
$CurY = $CurY + 10
GuiCtrlCreateGroup("WIM Image", $CurX+10, $CurY, 580, 155)
$CurY = $CurY + 18
GUICtrlCreateLabel("Source", $CurX+20, $CurY+3)
$hCaptureSourceEdit = GUICtrlCreateInput("", $CurX+85, $CurY, 300)
$hCaptureSourceBrowse = GUICtrlCreateButton("Browse", $CurX+395, $CurY-2)
$CurY = $CurY + 27
GUICtrlCreateLabel("Destination", $CurX+20, $CurY+3)
$hCaptureDestEdit = GUICtrlCreateInput("MyWim.wim", $CurX+85, $CurY, 300)
$hCaptureDestBrowse = GUICtrlCreateButton("Browse", $CurX+395, $CurY-2)
$CurY = $CurY + 27
GUICtrlCreateLabel("Compression", $CurX+20, $CurY+3)
$hCaptureCompression = GUICtrlCreateCombo("Maximum", $CurX+85, $CurY, 100, 500, $CBS_DROPDOWNLIST)
GUICtrlSetData(-1, "Fast")
$CurY = $CurY + 27
GUICtrlCreateLabel("Name", $CurX+20, $CurY+3)
$hCaptureNameEdit = GUICtrlCreateInput("My Image Name", $CurX+85, $CurY, 300)
$CurY = $CurY + 27
GUICtrlCreateLabel("Description", $CurX+20, $CurY+3)
$hCaptureDescEdit = GUICtrlCreateInput("My Image Description", $CurX+85, $CurY, 300)
; Options Group
$CurY = $CurY + 40
GuiCtrlCreateGroup("Options", $CurX+10, $CurY, 580, 100)
$CurY = $CurY + 18
GUICtrlCreateLabel("/config", $CurX+20, $CurY+3)
$hCaptureConfigEdit = GUICtrlCreateInput("", $CurX+85, $CurY, 300)
$hCaptureConfigBrowse = GUICtrlCreateButton("Browse", $CurX+395, $CurY-2)
$CurY = $CurY + 27
GUICtrlCreateLabel("Switches", $CurX+20, $CurY+3)
$hCaptureFlagsEdit = GUICtrlCreateInput("", $CurX+85, $CurY, 300)
$CurY = $CurY + 27
$hCaptureBootCheck = GUICtrlCreateCheckbox("/boot (WinPE Images Only) ", $CurX+20, $CurY)
$hCaptureCheckCheck = GUICtrlCreateCheckbox("/check", $CurX+190, $CurY)
$hCaptureDiagCheck = GUICtrlCreateCheckbox("Display ImageX Console Window", $CurX+260, $CurY)
$hCaptureButtonGo = GUICtrlCreateButton("&Capture!", $BaseX+500, $BaseY+290, 100)
;
; Apply Tab
;
$hTab_2 = GUICtrlCreateTabItem(" Apply ")
$CurX = $BaseX
$CurY = $BaseY
; File Group
$CurY = $CurY + 10
GuiCtrlCreateGroup("WIM Image", $CurX+10, $CurY, 580, 205)
$CurY = $CurY + 18
GUICtrlCreateLabel("1. Source", $CurX+20, $CurY+3)
$hApplySourceEdit = GUICtrlCreateInput("MyWim.wim", $CurX+85, $CurY, 300)
$hApplySourceBrowse = GUICtrlCreateButton("Browse", $CurX+395, $CurY-2)
$CurY = $CurY + 27
GUICtrlCreateLabel ("Input Image Number", $CurX+15, $CurY+30, 70, 30)
$hApplyName = GUICtrlCreateInput("1", $CurX+85, $CurY+30, 40, 20)
$hApplyNameBrowse= GUICtrlCreateButton("2. Poll Image Number", $CurX+15, $CurY+1)
$treeview = GUICtrlCreateTreeView ( 150, 90, 450, 120, BitOr($TVS_HASBUTTONS, $TVS_HASLINES, $TVS_LINESATROOT, $TVS_DISABLEDRAGDROP, $TVS_SHOWSELALWAYS), $WS_EX_CLIENTEDGE)
$CurY = $CurY + 27
GUICtrlCreateLabel("Destination", $CurX+20, $CurY+103)
$hApplyDestEdit = GUICtrlCreateInput("", $CurX+85, $CurY+100, 300)
$hApplyDestBrowse = GUICtrlCreateButton("Browse", $CurX+395, $CurY+98)
; Options Group
$CurY = $CurY + 40
GuiCtrlCreateGroup("Options", $CurX+10, $CurY+100, 580, 50)
$CurY = $CurY + 18
Dim $hReboot = GUICtrlCreateCheckbox ( "Automatically Reboot", $CurX+20, $CurY+105, 125, 15)
$hApplyVerifyCheck = GUICtrlCreateCheckbox("/verify", $CurX+150, $CurY+105, 50, 15 )
$hApplyDiagCheck = GUICtrlCreateCheckbox("Display ImageX Console Window", $CurX+210, $CurY+105, 200, 15 )
Dim $hDPart = GUICtrlCreateButton ( "Partition/Format", $BaseX+390, $BaseY+290, 100)
$hApplyButtonGo = GUICtrlCreateButton("&Apply!", $BaseX+500, $BaseY+290, 100)
;
; Set Default Options
;
LoadSettings()
SettingsToGUI()
;
; The GUI message loop
;
GuiSetState()
While 1
$msg = GuiGetMsg()
Select
; General Messages
Case $msg = $GUI_EVENT_CLOSE
ExitLoop
; Capture Messages
Case $msg = $hCaptureButtonGo
DoCapture()
Case $msg = $hCaptureSourceBrowse
$sDir = BrowseForDirectory()
if $sDir Then GUICtrlSetData($hCaptureSourceEdit, $sDir)
Case $msg = $hCaptureDestBrowse
$sFile = BrowseForWimToSave()
if $sFile Then GUICtrlSetData($hCaptureDestEdit, $sFile)
Case $msg = $hCaptureConfigBrowse
$sFile = BrowseForConfig()
If $sFile Then GUICtrlSetData($hCaptureConfigEdit, $sFile)
; Apply Messages
Case $msg = $hDPart
MsgBox(4144, "DiskPart GUI", "*** USE AT YOUR OWN RISK *** | *** USE AT YOUR OWN RISK ***" & @CRLF & @CRLF & _
" *You may need to reboot for the changes to take effect.*" & @CRLF & @CRLF & _
" If you just format a partition you do not need to reboot.")
FileInstall("DiskPartitioner.exe", @ScriptDir & "\DiskPartitioner.exe")
RunWait(@ScriptDir & '\DiskPartitioner.exe')
FileDelete(@ScriptDir & "\Diskpartitioner.exe")
Case $msg = $hApplyNameBrowse
PollImage()
Case $msg = $hApplyButtonGo
DoApply()
Case $msg = $hApplyDestBrowse
$sDir = BrowseForDirectory()
if $sDir Then GUICtrlSetData($hApplyDestEdit, $sDir)
Case $msg = $hApplySourceBrowse
$sFile = BrowseForWimToLoad()
if $sFile Then GUICtrlSetData($hApplySourceEdit, $sFile)
; Drive Map Messages
Case $msg = $hMapButtonGo
DoMapping()
Case Else
;;;
EndSelect
WEnd
Exit
;
; FUNCTIONS
;
Func BrowseForDirectory()
$sDir = FileSelectFolder("Select source folder", "")
If StringRight($sDir, 1) = "\" Then $sDir = StringTrimRight($sDir, 1)
Return $sDir
EndFunc
Func BrowseForWimToSave()
$sFile = FileSaveDialog( "Select destination file", "", "WIM Files (*.wim)", 3)
If @error Then Return ""
If StringRight($sFile, 4) <> ".wIM" Then $sFile = $sFile & ".wim"
Return $sFile
EndFunc
Func BrowseForWimToLoad()
$sFile = FileOpenDialog( "Select source file", "", "WIM Files (*.wim)", 3)
If @error Then Return ""
Return $sFile
EndFunc
Func BrowseForConfig()
$sFile = FileOpenDialog("Select config file", @ScriptDir, "INI files (*.ini)", 1)
If @error Or StringRight($sFile, 4) <> ".ini" Then Return ""
Return $sFile
EndFunc
Func DoCapture()
$sCmd = '"' & @ScriptDir & '\imagex.exe"'
If $gCaptureConfig <> "" Then $sCmd = $sCmd & ' /config "' & $gCaptureConfig & '"'
If $gCaptureCompression = "fast" Then
$sCmd = $sCmd & " /compress fast"
Else
$sCmd = $sCmd & " /compress maximum"
EndIf
If $gCaptureCheck = 1 Then $sCmd = $sCmd & " /check"
If $gCaptureBoot = 1 Then $sCmd = $sCmd & " /boot"
If $gCaptureFlags <> "" Then $sCmd = $sCmd & ' ' & $gCaptureFlags
; $sCmd = $sCmd & ' /capture /scroll "' & $sDir & '" "' & $sFile & '"'
$sCmd = $sCmd & ' /capture /scroll "' & GUICtrlRead($hCaptureSourceEdit) & '" "' & GUICtrlRead($hCaptureDestEdit) & '"'
$sCmd = $sCmd & ' "' & GUICtrlRead($hCaptureNameEdit) & '" "' & GUICtrlRead($hCaptureDescEdit) & '"'
If GUICtrlRead($hCaptureDiagCheck) = '1' Then
$ret = RunWait($sCmd, @WorkingDir, @SW_SHOW)
Else
$ret = ShowProgress($sCmd, 'Capturing...')
EndIf
;$ret = RunWait($sCmd, @WorkingDir, @SW_SHOW)
If $ret = '0' Then
SplashTextOn ( 'ImageX Status', 'Image Successfully Created!', 400, 50, -1, -1, 32, "Tahoma", 14, 500)
Sleep (3000)
SplashOff ()
Else
SplashTextOn ( 'ImageX Status', 'ImageX.exe ERROR : ' & $ret, 400, 50, -1, -1, 32, "Tahoma", 14, 500)
Sleep (5000)
SplashOff ()
EndIf
EndFunc
Func PollImage ()
Dim $nitem
Dim $imageinfo = " "
$read = GUICtrlRead ($hApplySourceEdit)
$sCmd = "imagex.exe"
If $read = "" Then
MsgBox (48, "Input required", "Please select the source")
Else
$sCmd = $sCmd & ' /info "' & $read & '"'
EndIf
;MsgBox(0, "scmd", $sCmd)
Dim $ret = Run(@ComSpec & " /c " & $sCmd & '"', @ScriptDir, @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD )
While 1
$line = StdoutRead($ret)
If $line = "" Then ExitLoop
$imageinfo = $imageinfo & $line
; MsgBox(0, "RunDOS", $line)
If @error Then ExitLoop
WEnd
_GUICtrlTreeViewDeleteAllItems ($treeview)
$aImageInfo = _StringBetween ( $imageinfo, "", " " )
If @error Then $aImageInfo = _ArrayCreate("")
$aImageDesc = _StringBetween ( $imageinfo, "", " " )
If @error Then $aImageDesc = _ArrayCreate("")
$aImageFileCount = _StringBetween ( $imageinfo, "", " " )
If @error Then $aImageFileCount = _ArrayCreate("")
;$aImageBuild = _StringBetween ( $imageinfo, "", " " )
; If @error Then $aImageBuild = _ArrayCreate("")
$imagenumber = UBound ($aImageInfo, 1)
If @error Then $imagenumber = _ArrayCreate("")
$x = 0
Dim $nitem[$imagenumber]
Do
$nitem[$x] = GUICtrlCreateTreeViewItem ( "Image: #" & $x +1 & ": " & $aImageInfo[$x], $treeview )
GUICtrlCreateTreeViewItem ( "Description: " & $aImageDesc [$x], $nitem[$x] )
GUICtrlCreateTreeViewItem ( "File Count: " & $aImageFileCount [$x], $nitem[$x] )
;GUICtrlCreateTreeViewItem ( "Build Version: " & $aImageBuild [$x], $nitem[$x] )
GUICtrlSetState($nitem[$x], $GUI_DEFBUTTON)
$x = $x + 1
Until $x = $imagenumber
EndFunc
Func DoApply()
If StringInStr(GUICtrlRead(47, 1),'Image: #') > 0 Then
Dim $arINum = StringSplit(GUICtrlRead(47, 1), '#')
GUICtrlSetData($hApplyName, StringLeft($arINum[2],1))
Else
Msgbox(4096,"Apply", "You must select the image to apply." & @CRLF & "Example: Image: #1")
Return
EndIf
$sCmd = '"' & @ScriptDir & '\imagex.exe"'
If $gApplyVerify = 1 Then $sCmd = $sCmd & " /verify"
$sCmd = $sCmd & ' /apply /scroll "' & GUICtrlRead($hApplySourceEdit) & '" "' & GUICtrlRead($hApplyName) & '" "' & GUICtrlRead($hApplyDestEdit) & '"'
If GUICtrlRead($hApplyDiagCheck) = '1' Then
$ret = RunWait($sCmd, @WorkingDir, @SW_SHOW)
Else
$ret = ShowProgress($sCmd, 'Applying...')
EndIf
If $ret = '0' Then
SplashTextOn ( 'ImageX Status', 'Image Successfully Applied!', 400, 50, -1, -1, 32, "Tahoma", 14, 500)
Sleep (3000)
SplashOff ()
Else
SplashTextOn ( 'ImageX Status', 'ImageX.exe ERROR : ' & $ret, 400, 50, -1, -1, 32, "Tahoma", 14, 500)
Sleep (5000)
SplashOff ()
EndIf
$Rebootstate = GUICtrlRead ($hReboot)
If $Rebootstate = 1 Then
_RunDOS("Start wpeutil reboot")
EndIf
EndFunc
Func DoMapping()
$gMapLetter = GUICtrlRead ( $hMapLetter )
DriveMapDel($gMapLetter)
$gMapShare = GUICtrlRead ( $hMapShareEdit );IniRead($sIni, "Map", "Share", "\\SERVER\SHARE")
$VistaAccount = GUICtrlRead ( $hMapUserEdit )
$VistaPwd = GUICtrlRead ( $hMapPasswordEdit )
; Msgbox(0,"MAP",$gMapLetter & $gMapShare & $VistaAccount & $VistaPwd)
$res = DriveMapAdd($gMapLetter, $gMapShare, 0, $VistaAccount, $VistaPwd)
If $res Then
SplashTextOn ( 'Mapping Drive...', 'Drive successfully mapped!', 250, 50, -1, -1, 32, "Tahoma", 14, 500)
sleep (2000)
SplashOff()
Else
MsgBox(16, "Drive Mapping", "Error mapping drive! Code: " & $avDriveMapAdd[@error])
EndIf
EndFunc
Func LoadSettings()
$sIni = @ScriptDir & "\gimagex.ini"
$gCaptureSource = IniRead($sIni, "CAPTURE", "Source", "")
$gCaptureDestination = IniRead($sIni, "CAPTURE", "Destination", "MyWim.wim")
$gCaptureCompression = IniRead($sIni, "CAPTURE", "Compression", "Maximum")
$gCaptureFlags = IniRead($sIni, "CAPTURE", "Flags", "")
$gCaptureConfig = IniRead($sIni, "CAPTURE", "Config", "")
$gCaptureBoot = IniRead($sIni, "CAPTURE", "Boot", "1")
$gCaptureCheck = IniRead($sIni, "CAPTURE", "Check", "1")
$gCaptureName = IniRead($sIni, "CAPTURE", "Name", "My Build Name")
$gCaptureDescription = IniRead($sIni, "CAPTURE", "Description", _Now())
$gCaptureDiag = IniRead($sIni, "CAPTURE", "Diag", "0")
;
$gApplySource = IniRead($sIni, "APPLY", "Source", "")
$gApplyDestination = IniRead($sIni, "APPLY", "Destination", "MyWim.wim")
$gApplyVerify = IniRead($sIni, "APPLY", "Verify", "0")
$gApplyName = IniRead($sIni, "APPLY", "Name", "1")
$gApplyDiag = IniRead($sIni, "APPLY", "Diag", "0")
$gMapLetter = IniRead($sIni, "MAP", "Letter", "M:")
$gMapShare = IniRead($sIni, "MAP", "Share", "\\Server\Share")
$gMapUser = IniRead($sIni, "MAP", "User", "User")
EndFunc
Func SettingsToGUI()
; CAPTURE
GUICtrlSetData($hCaptureSourceEdit, $gCaptureSource)
GUICtrlSetData($hCaptureDestEdit, $gCaptureDestination)
GUICtrlSetData($hCaptureCompression, $gCaptureCompression)
GUICtrlSetData($hCaptureFlagsEdit, $gCaptureFlags)
GUICtrlSetData($hCaptureConfigEdit, $gCaptureConfig)
If $gCaptureBoot = 1 Then
GUICtrlSetState($hCaptureBootCheck, $GUI_CHECKED)
Else
GUICtrlSetState($hCaptureBootCheck, $GUI_UNCHECKED)
EndIf
If $gCaptureCheck = 1 Then
GUICtrlSetState($hCaptureCheckCheck, $GUI_CHECKED)
Else
GUICtrlSetState($hCaptureCheckCheck, $GUI_UNCHECKED)
EndIf
If $gCaptureDiag = 1 Then
GUICtrlSetState($hCaptureDiagCheck, $GUI_CHECKED)
Else
GUICtrlSetState($hCaptureDiagCheck, $GUI_UNCHECKED)
EndIf
GUICtrlSetData($hCaptureNameEdit, $gCaptureName)
GUICtrlSetData($hCaptureDescEdit, $gCaptureDescription)
; APPLY
GUICtrlSetData($hApplySourceEdit, $gApplySource)
GUICtrlSetData($hApplyDestEdit, $gApplyDestination)
If $gApplyVerify = 1 Then
GUICtrlSetState($hApplyVerifyCheck, $GUI_CHECKED)
Else
GUICtrlSetState($hApplyVerifyCheck, $GUI_UNCHECKED)
EndIf
If $gApplyDiag = 1 Then
GUICtrlSetState($hApplyDiagCheck, $GUI_CHECKED)
Else
GUICtrlSetState($hApplyDiagCheck, $GUI_UNCHECKED)
EndIf
GUICtrlSetData($hApplyName, $gApplyName)
; MAP
GUICtrlSetData($hMapLetter, $gMapLetter)
GUICtrlSetData($hMapShareEdit, $gMapShare)
GUICtrlSetData($hMapUserEdit, $gMapUser)
GUICtrlSetData($hMapPasswordEdit, $gMapPassword)
EndFunc
Func ShowProgress($sCmd, $ImageType)
;Include rtconsole.exe for progress bar.
;
FileInstall("rtconsole.exe", @ScriptDir & "\rtconsole.exe")
;Msgbox(0,"RUN",'"' & @ScriptDir & '\rtconsole.exe" ' & $sCmd)
$foo = Run('"' & @ScriptDir & '\rtconsole.exe" ' & $sCmd,'','',2+4)
$line1 = '0'
ProgressOn('Imagex', 'ImageX', $line1)
While 1
$line = StdoutRead($foo)
if StringInStr($line, 'ImageX Tool for Windows') <> 0 then $line = 0
if StringInStr($line, 'Progress: 100%') <> 0 then ExitLoop
if StringInStr($line, 'Error') <> 0 then ExitLoop
$line = StringStripWS($line, 7)
if StringInStr($line, ',') <> 0 Then
; $line2 = StringSplit($line, ',')
; $line3 = StringRight($line2[2], StringLen($line2[2])-1)
EndIf
$line3 = StringSplit($line, @CRLF)
$line1 = StringSplit($line, '%')
$line = StringRight($line1[1], 2)
If @error Then ExitLoop
If $line <> "" Then
ProgressSet($line, $line3[1], $ImageType)
EndIf
Wend
ProgressOff()
FileDelete(@ScriptDir & "\rtconsole.exe")
EndFunc
The following files from Microsoft's WAIK
Lessons from the U.S.S.R. coup attempt
视频:《Following the Sun --追随太阳》
output error file to the following location:A:\GHOSTERR.TXT
Boriska - The boy from Mars.
Madagascar Script - transcript from the scree...
Chapter three: The Letters From No one
different from 与 the same as
Getting a CF_DIB or CF_METAFILEPICT from the ...
The 5 worst inventions from brilliant invento...
Tales from the Script - October 2002
Relationship between employees from the enterprise value of the expression
from the formal preparation in accordance with the unified arrangements
The Devil’s Eye
The Bengazi's Assassin
what;s the matter
The King's Academy
Dreams From Africa: Exploring Barack Obama's ...
Takeaways for journalists from today’s Apple ...
How to identify different encodings on files without the use of a BOM
The World's Happiest Countries
she's off the hook!:
Somewhere the sun' s shing
solem's vision blog: Reading and writing .mat files with Python