九乡新闻网苹果机如何装双系统:BYTE WORD DWORD
来源：百度文库 编辑：九乡新闻网 时间：2024/05/03 05:00:15
一、定义
在VC6.0的Microsoft Visual Studio\VC98\Include\windef.h 里，定义了BYTE,WORD,DWORD
typedef unsigned long DWORD;
typedef unsigned char BYTE;
typedef unsigned short WORD;
即:
BYTE:8位
WORD: 16位
DWORD: 32位
二、Window 宏
1.LOBYTE( 从给定16位值中提取低位字节)
BYTE LOBYTE(
WORD wValue // value from which low-order byte is retrieved
);
#define LOBYTE(w) ((BYTE) (w))
如：WORD w=-0x1234;//w在内存中以补码形式存储:0xedcc,即0xcc(低地址) 0xed（高地址）
printf("w的低位字节:%x\n",LOBYTE(w));//输 出：w的低位字节:cc
2.HIBYTE( 从给定16位值中提取高位字节)
BYTE HIBYTE(
WORD wValue // value from which high-order byte is retrieved
);
#define HIBYTE(w) ((BYTE) (((WORD) (w) >> 8) & 0xFF))
如：printf("w的高位字节:%x\n",HIBYTE(w));// 输出：w的高位字节:ed
3.LOWORD(从给定32位值中提取低位word)
WORD LOWORD(
DWORD dwValue // value from which low-order word is retrieved
);
#define LOWORD(l) ((WORD) (l))
如: DWORD l = 0x12345678;//l在内存中存储为:0x78,0x56,0x34,0x12
printf("l的低位字:%x\n",LOWORD(l));// 输出：l的低位字:5678
4.HIWORD(从给定32位值中提取高位word)
WORD HIWORD(
DWORD dwValue // value from which high-order word is retrieved
);
#define HIWORD(l) ((WORD) (((DWORD) (l) >> 16) & 0xFFFF))
如:printf("l的高位字:%x\n",HIWORD(l));//输出：l的高位字:1234
5.MAKEWORD(将两个给定的无符号字符值连接成为一个16位整数)
WORD MAKEWORD(
BYTE bLow, // low-order byte of short value
BYTE bHigh // high-order byte of short value
);
#define MAKEWORD(a, b) \
((WORD) (((BYTE) (a)) | ((WORD) ((BYTE) (b))) << 8))
如: BYTE bLow=0x34,bHigh=0x12;
printf("MAKEWORD(%x,%x)=%x\n",bLow,bHigh,MAKEWORD(bLow,bHigh));
输出结果为: MAKEWORD(34,12)=1234
6.MAKELONG(将两个给定的16位值连接成为一个32位整数)
DWORD MAKELONG(
WORD wLow, // low-order word of long value
WORD wHigh // high-order word of long value
);
#define MAKELONG(a, b) \
((LONG) (((WORD) (a)) | ((DWORD) ((WORD) (b))) << 16))
如：WORD vLow=0x5678,vHigh=0x1234;
printf("MAKELONG(%x,%x)=%x\n",vLow,vHigh,MAKELONG(vLow,vHigh));
输出结果：MAKELONG(5678,1234)=12345678