醉逍遥烧钱吗:Dress Size - Clothes

  1:clothingsize
  2:Definitions
  3: ClothingSizeUnitsDescription
  4: Knowledgeidentification
  5: Measurement of dimensions
  6:Size ofimported clothing
  7:Detailedmeasurements
  8:Women'sSize
  9:HanSizeRubin
10:SizeConversionReference Table

 

Clothing size is a measure to correspond with people, so that the body can in some index parameters, it can also mean the size of clothing measured index. Clothing parameters that, when
We use shapes instead.
A: Clothing Size
Also refers to the clothing size, body shape and clothing is that a series of measure specifications, is to regulate manufacturers and the convenience of our customers choose to form a set of measured indices.
II: Definitions】
Model Number: It is said that some of the basic size of clothing that identifies the size of clothing
    No. ------ in which the body's height, in centimeters, said the design and purchase clothing based on the length.
    ------ In which the body of the chest-type or waist circumference, in centimeters, said the design and purchase clothing too fat basis. Bust means upload, download refers to the waist.
    ------ Is the body's bust size and waist circumference based on the difference divided by size, and shape into four categories, namely, Y, A, B, C-type
Y: that the difference between bust and waist circumference was 19cm ~ 24cm between the number of
A: Chest and waist circumference, said the difference is between 14cm ~ 18cm
B: Chest and waist circumference, said the difference is between 9cm ~ 13cm
C: Chest and waist circumference, said the difference between the 4cm ~ 8cm
No. Series: The center of the intermediate body, to both sides of the ascending or descending order. Composed by 5cm tall tranche series, Bust to 4cm composed of sub-files series,
Waist to 4cm, 2cm, composed of series of sub-file, the series is as follows: XS SML XL
Top Model: 150/76A 155/80A 160/84A 165/88A 170/92A
Skirt / Pants Type: 150/58A 155/62A 160/66A 165/70A 170/74A
III: Introduction clothing size unit
S: Small Small --- (female)
M: Middle of
L: Large Large
XL: extra large increase
Probably Height:
Size corresponding to height (cm) / Men / Women
  S/165/55; M/170/160; L/175/165; XL/180/170; XXL/185 -
Four: Knowledge identification
Apparel products specifications and methods of measurement sites
 A mighty: the amount of horizontal flat collar, standing collar volume catchy, the amount of other areas under the mouth.
 2 Length: from the highest point before the left shoulder seam to the bottom of the vertical volume.
 3 Bust: fasten buttons, before and after smoothing the body, along the armhole seam across the end of volume.
 4 Sleeve Length: measured from the highest point of the left sleeve cuff at the edge.
 5 Shoulder Sleeve: From the midpoint of the amount of back neck to cuff the middle fossa.
 6 Total Shoulder: the rotator cuff by the amount of seam cross the intersection.
 7 Cuff: Cuff flat measure.
V: Measurement of dimensions
(1) The basic principle of all clothing measurements are the same, but different customers, it will be slightly different measurement methods. Therefore, measuring size, one should pay attention to
         Customer's specification sheet size measurement methods have prompted the second is going to understand the customer pre-production measurement, the third is in the confirmation samples and prenatal samples
         Measurement, if found, and customers have a greater difference in measured time (beyond the tolerance), maybe you do not meet the customer's measurement methods of measurement, then
         Should be (in a timely manner and customers to communicate about the size measurement method)
 (2) before the measurement, it is best to make a record of measurement results for the size of the table. Make a record you can easily do on the analysis of the size measured. If the size does not match, you can
         This is the basis required to correct the production sector.
(3) the measured clothing must be neat, it is difficult to imagine a wrinkled clothing allows inspectors the right measurements. Measured clothing buttons, zippers must wear. Measured Clothing
         Before the measurement or measurements are not allowed to stretch or curl, in particular, can not fail because the size of clothing while the tensile test, or curl.
(4) in the measurement, the need to test clothing flat on the examination table, examination table size must be sufficient to flat the whole garment, it must be flat and clean. Measurement needs
         Under bright light, the general requirements of not less than 750 lx. Foot is the most common measurement tool. Recommend the use of easy deformation, flexible ruler, and can fine
         Sure to 1 / 8 inch. As the process of scale in the use of force will be the role, often it is necessary to calibrate your feet, it is recommended to be calibrated once every week.
(5) measurement, to ensure that each size were measured. In order to ensure the accuracy of measurements, the general random measure 2-3, perhaps necessary, will be random checks
         More quantity. If the test has several colors of a paragraph, then the colors should be spot checks to ensure that all the.
VI: imported clothing size
Signs and specifications of foreign clothing type of apparel that distinction. The number of foreign-based specifications of commonly used clothing letters and a number said.
    Body marks:
Y----- bust, waist circumference difference 16 cm;
YA-type ---- bust, waist circumference difference 14 cm;
-A ---- bust, waist circumference difference 12 cm;
AB-type ---- bust, waist circumference difference 10 cm;
B-type ---- bust, waist circumference difference 8 cm;
BE-type ---- bust, waist and poor in 4 cm;
-E ---- bust, waist and poor in 2 cm or difference is small.
Height marks:
     1 - said the height of 150 cm;
     2 - that height 155 cm;
     3 - 160 cm tall and so on behalf of, a representative number of increasing the height of each additional 5 cm, height representative of the largest number is "8", on behalf of height 185 cm.
     For example: "AB5" said the clothing given to 170 cm body, chest, waist circumference 10 cm difference between people who wear.
 The number of foreign-based apparel specifications also simplify or English letters. English signs are as follows:
 Said the clothing of a large L; M, said the number one clothing; S, said a small clothing.
VII: Detailed measurements
1. Basic dimensions
Basic dimensions in the human body, there are some very important dimensions.
They can be used as the basic size of the body, but also as a measurement of the relative position of the size.
(1) Chest Bust / Chest: The highest point of the chest for chest level, which is the chest circumference.
     (2) waist W aist: the most narrow place in the body for the natural waist level, which is the waist circumference.
 (3) Shoulder Shoulder: Shoulder point to shoulder point length is the width.
 (4) Hip Hip: in the hip at its widest point, as the horizontal line, called the hip circumference, also known as Hip.
 (5) hip Crotch: the base of the trunk, thighs between the central office
 (6) Knee Knee: medial knee and knee more horizontal.
 (7) before (neck) collar in CFNeck (CenterFrontNeck).
 (8) and after (neck) collar in: CBNeck (CenterBack Neck).
 (9) shoulder high H. PS (High PointofShould).
2. Size
Size of clothing is based on the basic dimensions of the human body, according to the different styles, coupled with the appropriate amount of loose. Once the garment size specifications after
It is the basis for apparel manufacturing. Size of customers in some form, in the signs in the standard size, it will also mark the main body dimensions. If necessary,
In accordance with body size, to determine the correct size specifications or not. However, the clothing manufacturer specifications of size and the actual size is always different, so the customer
The size of the table given tolerance TOL (Tolerance). The actual manufacture of clothing as long as the required size within the tolerance, the size is acceptable. Serving
Loaded quality management, to ensure that the manufacture of clothing sizes to specification size is very important. Size is too big or too small, will affect the wear and affect the fit of clothing.
3. Measurement of size
(1) The basic principle of all clothing measurements are the same, but different customers, it will be slightly different measurement methods. Therefore, measuring size,
         Customers should pay attention to the size of a spec sheet if measurement tips
         Second, in pre-production is necessary to understand the customer's measurement,
         Third, in identifying the sample and the measurement of prenatal samples, if found, and customers have a greater difference in measured time (beyond the tolerance), maybe your
            Measurement methods do not meet the customer's measurement method, then clients should be to communicate timely and relevant size measurement method.
(2) before the measurement, it is best to make a record of measurement results for the size of the table. Make a record you can easily do on the analysis of the size measured. If the size
         Not match, can this as the basis, required to correct the production sector.
(3) the measured clothing must be neat, it is difficult to imagine a wrinkled clothing allows inspectors the right measurements. Measured clothing buttons, zippers must wear.
         Measured before the measurement or measurement of clothing are not allowed to stretch or curl, in particular, can not fail because the size of clothing while the tensile test, or curl.
(4) in the measurement, the need to test clothing flat on the examination table, examination table size must be sufficient to flat the whole garment, it must be flat and clean.
         Measurements need to be in bright light and generally require no less than 750 lx. Foot is the most common measurement tool. Recommend the use of easy deformation,
         Flexible ruler, and can be accurate to 1 / 8 inch. As the process of scale in the use of force will be the role of regular calibration of your feet is necessary,
         Recommendations should be calibrated once every week.
(5) measurement, to ensure that each size were measured. In order to ensure the accuracy of measurement, usually measuring 2 Yiu three random, and perhaps necessary,
         The number of random checks will be more. If the test has several colors of a paragraph, then the colors should be spot checks to ensure that all the. Measurement, if
         Found that more than size of its manufacturing tolerance specifications required size, then may require continuous measurements 10, 15, failed to determine the proportion of
         Then gives solutions to problems.  
Eight: Women Size
     Custom sizes generally need to provide the following information:
1) Chest, 2), waist circumference, 3) hip, 4) arm length, 5) Shoulder, 6) height, 7) neck circumference, 8) on the chest, 9) at breast height, 10), chest,
   11), arm circumference, 12) sleeve cage, 13), wrist circumference, 14) Shoulder to waist height, 15) waist to skirt length, 16) Chest Pitch
    Measurement -
1) Bust: shaping bra wearing the highest point when measured around the chest, around the size, the girth should be kept level.
  2) Waist: the smallest part of waist circumference, waist a little on the place.
 3) Hips: around the fullest part around the hip size.
 4) Arm length: shoulder down to the apex of the vertical length of the wrist, if the fifth of the sleeve is measured to the elbow.
 5) Width: measured by the distance after the back of the neck, or from the neck to both sides measured from the point, and then add the data.
 6) Length: from neck point through bust point to the foot of the distance, after the height of shoes.
 7) neck circumference: around the neck area under the center of the circumference of a circle, the size is appropriate to slightly loose.
 8) Chest: around the chest from armpit circle, starting from the expansion of the chest measured at chest.
 9) at breast height: from neck to chest the highest point of the distance, keep tape measure vertical.
 10), Bust: around the bottom edge of a circle the size of the breast.
 11) arm circumference: arm around the fullest part around the widest size.
 12) sleeve cage: the armpit toward the direction of a circle the size of the shoulder, do not amount too tightly, so as not to not get into.
 13) around the wrist: carpal wrist area the size of perimeter, circumference appropriate to relax.
 14) Shoulder to waist height.
 15) waist to skirt length.
 16) Thoracic space: the distance between the highest point of 2 chest, keep tape measure parallel.  
Nine: Han Size Rubin
1, the upload size is:
Code for 01 yards, said: "XXS"
Code for 02 yards, said: "XS"
Code for 03 yards, said: "S"
Code for 04 yards, said: "M"
Code for 05 yards, said: "L"
Code for 06 yards, said: "XL"
Code for 07 yards, said: "XXL"
2, clothing size conversion reference table
70 that code for: "48" (M)
 71 that code for: "50" (L)
 72 that code for: "52" (XL)
 73 that code for: "54" (XXL)
3, the pants size is:
Waist 26 representatives as follows: "1.9-foot"
Waist 27 representatives as follows: "2.0-foot"
Waist 28 representatives as follows: "2.1-foot"
Waist 29 representatives as follows: "2.2-foot"
Waist 30 representatives as follows: "2.3-foot"
Waist 31 representatives as follows: "2.4-foot"
Waist 32 representatives as follows: "2.5-foot"
Waist 33 representatives as follows: "2.6-foot"
Waist 34 representatives as follows: "2.7-foot"
36 represents the waist as: "2.8-foot"
Waist 38 representatives as follows: "2.9-foot"
Waist 40 representatives as follows: "3.0-foot"
Waist 42 representatives as follows: "3.1-foot"
Waist 44 representatives as follows: "3.2-foot"
Waist 50 representatives as follows: "3.4-foot"
Waist 52 representatives as follows: "3.5-foot"
Waist 54 representatives as follows: "3.6-foot"
4, Western clothing sizes are:
80 that code for: "145"
81 that code for: "150"
82 that code for: "155"
83 that code for: "160"
84 that code for: "165"
85 that code for: "170"
86 that code for: "175"
87 that code for: "180"
88 that code for: "185"
5, fitted shirt size to:
60 that code for: "38"
61 that code for: "39"
62 that code for: "40"
63 that code for: "41"
64 that code for: "42"
65 that code for: "43"
66 that code for: "44"
67 that code for: "45"
68 that code for: "46"
6, fitted jacket size is:
70 that code for: "48" (M)
71 that code for: "50" (L)
72 that code for: "52" (XL)
73 that code for: "54" (XXL)  
X: Size Conversion Reference Table
1. Women (jackets, dresses, shirts, coat, suit)
Standard Size Details
    China (cm) 160-165 / 84-86 165-170 / 88-90 167-172 / 92-96 168-173 / 98-102 170-176 / 106-110
    International XS S M L XL
    United States 2 4-6 8-1012-1416-18
    34 European 34-3638-404244
2. Men (coat, shirt, suit)
Standard Size Details
China (cm) 165 / 88-90 170 / 96-98 175 / 108-110 180 / 118-122 185 / 126-130
International S M L XL XXL
3. Men (Shirt)
Standard Size Details
China (cm) 36 - 37 38 - 39 40 - 42 43 - 44 45 - 47
International S M L XL XXL
4. Men (pants)
Standard Size Details
Size 4,244,464,850
Waist 68 - 72 cm 71 - 76 cm 75 - 80 cm 79 - 84 cm 83 - 88 cm
Pants degrees 99 cm 101.5 cm 104 cm 106.5 cm 109 cm
5. Suit size table
suit size (unit unit: cm)
T-shirt Size SIZE JACKET (44-56) - pants TROUSERS (28-40)
Top COAT / pants TROUSERS Shoulder Chest Length Shoulder Bust Waist Length Sleeve Length Sleeves waist Buttocks hip leg long pants
 44-28 4,410,474,607,292,112
 46-30 4,610,675,617,696,113
 48-32 48 112,786,282,102,114
 50-34 50 114,796,386,106,115
 52-36 52 116,806,492,112,116
 54-38 54 118,816,598,118,117
 56-40 561,208,266,104,124
6. Underwear size conversion reference table
  Ms. A. bra - the cup size
 Standard Dimensions yards out fine
     China (cm) A B C D E
     U.S. AA A B C D DD DDD / E F FF G GG H HH J
     British AA A B C D DD E F FF G GG H HH J
     European AA A B C D E F
     French AA A B C D E F
     Italy B B or none C D DD E F
  B. Size Lingerie
 Standard Size Details
 China (cm) S M L XL XXL XXXL
 International XS S M L XL XXL XXXL
 U.S. 2468101214
 British 681012141618
 European 32343638404244
 France 34363840424446
 Italy 38404244464850
  Men's underwear size C.
 Standard Size Details
 China (cm) Waist 61 - 71 / 71 - 81 / 81 - 91 / 91--102 / 102--112
Hip circumference 80-90/86-95/91-100/96-105/100-101
 International S M L XL XXL
 USA (inches) 28 --3030--3232-- 3434--3838--42

7. Clothing size tolerance
Ming said the suit area (male / female) windbreaker (male / female) General shirt cotton shirt Down Down Long Short
Length ± 1.0 1.5 ± 1.0 ± 1.5 ± 2.0 ± 2.5
Bust ± 2.0 ± 2.0 ± 2.0 ± 3.0 ± 2.5 ± 2.5
Mighty ± 0.6 ± 0.6 ± 0.6 ± 0.6 ± 1.0 ± 1.0
Shoulder ± 0.6 ± 0.6 ± 0.8 ± 1.0 ± 1.2 ± 1.2
Sleeve ± 0.7 ± 0.7 ± 0.8 ± 1.2 ± 1.5 ± 1.5
Length ± 1.5 ± 1.5 ± 2.5 No No No
Waist ± 1.0 ± 1.0 ± 2.0 No No No 【Article is excerpted from: Baidu Encyclopedia】
【Network reprint / Just reference】
【Translation is by Goolge】